More Information

The wallbe Eco 2.0 - 22 kW

You Wallbe Eco 2.0 was developed especially for the private sector. Due to the design, the Wallbe Eco 2.0 is easy to operate and represents a safe charging according to IEC 61851-1 Mode 3 through the technical components. The fact that the Wallbe Eco 2.0 is delivered ready for connection, only the supply line must be connected and you can load directly. The Wallbe Eco 2.0 offered here has a charging power of 22 kW and is 3 - phase. You can order the Wallbe Eco 2.0 here either with the 4 m charging cable and type 2 plug with type 2 charging socket. As an addition, there is a cable holder, where you can wrap the cable comfortably on the Wallbe Eco 2.0 and so saves a cable management system. Once connected between the electric car and the Wallbe Eco 2.0, the car communicates with the Wallbe Eco 2.0 via the charging cable and starts charging directly. So a simple plug and charge charging with the Wallbe Eco 2.0 is possible.

Integrated RCM module

The RCM module in the Wallbe Eco 2.0 detects a DC residual current via a sensor. Due to the integrated error detection no expensive FI type B is necessary. Only one FI type A must be present in the house installation. This is usually mandatory in the electrical installation and thus usually available.

Monitoring and contactor fault detection

If, due to a fault, the load contactor sticks, then the integrated contactor adhesive detection recognizes this and immediately interrupts charging.

Lock - Release module integrated

During the charging process, the Wallbe Eco 2.0 locks the inserted plug and you can not remove it. If an error such. If a power failure occurs, the lock release module unlocks the plug and you can remove it again.

Kompatibility

A Wallbe Eco 2.0 with fixed charging cable with type 2 plug is only compatible with electric cars with type 2 plug. If you opt for the variant with charging socket, then you can charge any car, since there are adapters from the type 2 charging socket to a car with a type 1 plug.

Wallbe Eco 2.0 - Quality from East Westphalia / Germany

All Wallbe Eco 2.0 charging stations are manufactured and delivered in East Westphalia.

Technische Daten

Charging cable

Standard: 4m charging cable type 2

Charging power

Up to 22kW
32A 3 Phase 400V
Charging current adjustable

release

Standard: Schlüsselschalter

interfaces

Modbus TCP via Ethernet RJ45 & Modbus RTU via RS485 Network connection for the internal web server and Modbus over TCP Connection possibility for energy meter via RS485 Integrated bus connector for expansion of the module for additional functions I / O modules Communication according to ISO / IEC 15118-3 between charging point and electric vehicle 4 digital inputs freely configurable 4 digital outputs freely configurable Possible with wallbe Pro - Online: UMTS modem / update capable and OCPP capable

safeguarding

RCM module integrated: DC fault detection DC 6mA Contact adhesive detection integrated Lock - Release module integrated: Unlocking of the charging plug in case of power failure

Conformity / approvals

Conformity / Approvals - CE compliant - Low voltage directive EN 61010-1 - Air and creepage distances EN50176 - Housing compliance with standards DIN 43880 - DIN EN 61851-1 safety tests Safety tests according to IEC / EN 60950-1 for information technology equipment. EMC standards Immunity to interference according to EN 61000-6-2 - EN 61000-4-2 electrostatic discharge (ESD) - EN 61000-4-3 electromagnetic fields (80Mhz to 1Ghz) - EN 61000-4-4 fast transient disturbances (burst) - EN 61000-4-5 surge voltages (Surge) - EN 61000-4-6 conducted high frequency fields - EN 61000-4-11 Voltage dips, interruptions ... Emitted interference according to EN 61000-6-3 - EN 55014 radio frequency HF - EN 61000-3-2 harmonic current - EN 61000-3-3 Voltage fluctuations and flicker - EN 55014-1 radio interference voltage

Color and design

Carbon Design, black / silver

Dimensions / weight

H 17cm x W 25cm x D 13cm about 5kg

Manufactured

Made in Ostwestfalen
Made in Germany

Safety / Protection class

Robust plastic housing, Made in Germany IP65 - suitable for indoor and outdoor use

Installation / Assembly

Easy and fast installation Pre-wired ready for connection

Details

More Information
SKU	10870
Weight	5.0000
Charging cable colour	Schwarz
Brand	Wallbe
MPN	Eco 2.0 22kW
Charging power / amperage	22kW / 32A / 3 phase
Options	Key switch, RCD (Personal protection)