The charging station was specially designed for public, semi-public and private use and offers high ease of use as well as safe charging in accordance with IEC 61851-1 Mode 3. With its compact dimensions, wallbe Pro can be used flexibly on the wall and as a column. Thus you load comfortably and particularly simply. wallbe Pro is quickly installed and can easily be extended by further stations. Of course also in your desired colour or individual design.
Finally a charging box that fits everywhere.
Charging is conveniently enabled via a key switch so that only authorised persons have access.
Your walbe charging station also has numerous safety mechanisms to reliably protect you and your vehicle from damage.
RCM module included
An RCM module is an all-current sensitive differential current monitoring module,
which has a DC sensor and an AC trigger.
Due to the integrated direct current fault detection >6mA you do not have to pay expensive FI type B
or FI type A (EV) in your domestic installation, a cheap FI type A is sufficient.
Detection and monitoring of protective adhesives
A standard-compliant charging station only supplies electricity when it receives a certain signal from the electric car.
With conventional charging stations, a fault can occur in which there is permanent current on the charging socket or the firmly attached charging cable.
Your wallbe reliably detects this fault and prevents personal injury and damage to property.
Lock - release module included
A standard-compliant charging station locks the charging plug into the charging socket during charging,
This means that the charging plug of your charging cable cannot be removed in the event of a power failure.
In the event of a power failure, however, your wallbe will ensure that your charger plug is securely unlocked.
MID compliant kWh energy meter included
Your wallbe Pro is delivered with a MID compliant kWh meter as standard, so you have your consumption data at a glance at all times.
Compatibility
Your wallbe with charging socket type 2 is suitable for all electric vehicles with type 2* and type 1** connection.
*(Type 2 to type 2 charging cable required.)
**(Type 2 to type 1 charging cable required.)
Your wallbe with fixed charging cable type 2 is suitable for all electric vehicles with type 2 connection.
Your wallbe only releases the charging current requested and supported by the car.
Flexibility
You can also operate your 22kW wallbe charging station as a 4.6kW (1-phase, 20A, 230V) or 7.4kW (1-phase, 32A, 230V) charging station by connecting the charging station from your electrician with only one phase and easily reducing it to the desired output.
wallbe - Quality from Germany
All wallbe charging stations are produced in Germany.