Electric Car Charging Station Charging Column

The wallbe Pro charging station 22kW 

Scope of delivery:

Charging box 22 kW - Standard: socket outlet type 2 - Optional: with permanently connected charging cable type 2, various types of power supplies Length
Robuste Säule
Anleitung

Dimensions:

H 125 cm x B 56cm x T 20cm

approx. 23 kg

Safety function:

IP54 - Indoor und Outdoor suitable
RCM module integrated: DC fault detection DC 6mA 
Integrated protective adhesive detection
Lock - Release Modul integrated: Unlocking of the charging plug in case of power failure 
Safety loading according to  IEC 61851-1 Mode 3
Lockable full metal housing

Advantages:

Charge current flexibly adjustable
Charging is conveniently enabled via a key switch so that only authorised persons have access.

The charging station was specially designed for public, semi-public and private use and offers high ease of use as well as safe charging in accordance with IEC 61851-1 Mode 3. With its compact dimensions, wallbe Pro can be used flexibly on the wall and as a column. Thus you load comfortably and particularly simply. wallbe Pro is quickly installed and can easily be extended by further stations. Of course also in your desired colour or individual design.

Finally a charging box that fits everywhere.
Charging is conveniently enabled via a key switch so that only authorised persons have access.
Your walbe charging station also has numerous safety mechanisms to reliably protect you and your vehicle from damage.


RCM module included
An RCM module is an all-current sensitive differential current monitoring module,
which has a DC sensor and an AC trigger.
Due to the integrated direct current fault detection >6mA you do not have to pay expensive FI type B
or FI type A (EV) in your domestic installation, a cheap FI type A is sufficient.

Detection and monitoring of protective adhesives
A standard-compliant charging station only supplies electricity when it receives a certain signal from the electric car.
With conventional charging stations, a fault can occur in which there is permanent current on the charging socket or the firmly attached charging cable.
Your wallbe reliably detects this fault and prevents personal injury and damage to property.

Lock - release module included
A standard-compliant charging station locks the charging plug into the charging socket during charging,
This means that the charging plug of your charging cable cannot be removed in the event of a power failure.
In the event of a power failure, however, your wallbe will ensure that your charger plug is securely unlocked.

MID compliant kWh energy meter included
Your wallbe Pro is delivered with a MID compliant kWh meter as standard, so you have your consumption data at a glance at all times.

Compatibility
Your wallbe with charging socket type 2 is suitable for all electric vehicles with type 2* and type 1** connection.
*(Type 2 to type 2 charging cable required.)
**(Type 2 to type 1 charging cable required.)
Your wallbe with fixed charging cable type 2 is suitable for all electric vehicles with type 2 connection.
Your wallbe only releases the charging current requested and supported by the car.

Flexibility
You can also operate your 22kW wallbe charging station as a 4.6kW (1-phase, 20A, 230V) or 7.4kW (1-phase, 32A, 230V) charging station by connecting the charging station from your electrician with only one phase and easily reducing it to the desired output.

wallbe - Quality from Germany
All wallbe charging stations are produced in Germany.


Technische Details

charger cable

Standard: Type 2 socket and Schuko socket
Optional: charging cable type 2 or type 1


 
charging capacity

Up to 22kW
32A 3-phase 400V
Charge current flexibly adjustable


 
release

Standard: Key switch

Optional: On/Off switch, RFID

 

interfaces

Connection option for energy meter via RS485
Integrated bus connector to extend the module for additional functions
    I/O modules
    Communication according to ISO/IEC 15118-3 between charging point and electric vehicle
Possible with wallbe Pro - Online: UMTS modem / updateable and OCPP capable


 
protection

RCM module integrated: DC fault detection DC 6mA
Integrated protective adhesive detection
Lock - Release module integrated: Unlocking of the charging plug in case of power failure


 

Conformity / Approvals


Conformity / Approvals
- CE conformity
- Low Voltage Directive EN 61010-1
- Air and creepage distances EN50176
- Housing Conforms to standards DIN 43880
- DIN EN 61851-1


 
radio testing
- EN 301 511 V9.0.2
- EN 301 908-1 V7.1.1
- EN 301 908-2 V6.2.1

security checks
Safety tests according to IEC/EN 60950-1 for information technology devices.


EMC Standards
Interference immunity according to EN 61000-6-2
- EN 61000-4-2 Electrostatic discharge (ESD)
- EN 61000-4-3 Electromagnetic fields (80Mhz to 1Ghz)
- EN 61000-4-4 fast transient disturbances (burst)
- EN 61000-4-5 Surge voltages
- EN 61000-4-6 Conducted high-frequency fields
- EN 61000-4-11 Voltage dips, interruptions ...



Interference emission according to EN 61000-6-3
- EN 55014 Interference radiation HF
- EN 61000-3-2 Harmonic current
- EN 61000-3-3 Voltage fluctuations and flicker
- EN 55014-1 Radio interference voltage


 
Colour and design

Available in all RAL colours
Standard colour hood: white
Standard colour of pedestal: Traffic black
Colored change cover / change cover *

* There are numerous design options** (optional with surcharge), please contact us,
we would be pleased to submit you an offer without obligation

** e.g. simple advertising space, RAL varnishing of the cover (hood), RAL varnishing of the complete
Column, customized logo - everything is possible.

The direct wire for you - 0049 (0) 5251 1420923

 

Dimensions / Weight

H 125cm x W 56cm x D 20cm
approx. 23 kg

Optional/accessories:

Stainless steel mounting plate Pro
Finished foundation incl. stainless steel mounting plate Pro - Price on request (276 kg!)

 

provenance
Made in Ostwestfalen
Made in Germany

 
Quality

We exclusively use high-quality, German components


 
Safety/ protection class 

Lockable full metal housing
IP54 - suitable for indoor and outdoor use


 
Installation/ Assembly

Quick and easy installation
Prewired ready for connection

   

Please note, due to size/weight, there are increased freight costs!
More Information
SKU 10961
Weight 35.0000
Charging cable colour Schwarz
Brand Wallbe
MPN wallbe Pro Säule 22kW-4m glatt
Charging power / amperage 22kW / 32A / 3 phase
Options Plug & Charge (push button), Key switch, Energy meter, RCD (Personal protection)

Wallbe | Pro column | Charging column electric car | Charging socket type 2 or fixed charging cable | 1x shock-proof socket | 22 kW | 32A | 3 phase | 4 m smooth

Beschreibung

wallbe Pro column- 22 kW

SKU:
10961
€1,748.00 from €1,718.00
Incl. 19% VAT, excl. Shipping Cost
Delivery Time 2-3 Tage